Yamaha REV500

--------------------------------

Superb Sound Quality
REV500 features 20-bit AD/DA oversampling converters and the same DSP as that of the PROR3 for superb sonic performance.


True Stereo Processing
Unlike some pseudo stereo reverberators, REV500 is a true stereo reverb processor, with independent left and right channels.


Organized Program Libraries
Reverb programs are categorized into group for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special.


Quick Audition
REV500 has snare and rim shot samples built-in, so programs and edits can be auditioned directly from the front panel (AUDITION button).


Professional Connectors
Balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB.


Input Level Monitor
A dual level control and two four-segment LED level meters simplify level setting for optimal performance.


MIDI
REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup.


Foot Switch
An optional footswitch can be used to mute the reverb effect or select reverb programs. Selection order is determined by the MIDI Program Change Map.


Audio Frequency Response: 20Hz - 20kHz (+1, -2dB); Dynamic Range: 96dB typical, greater than 90dB; Noise Level: Less than -72dB (IHF-A Filter); THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter)


AD/DA Conversion AD: 20-bit, 64-times oversampling; DA: 20-bit 8-times oversampling; Sampling Rate: 44.1 kHz
MIDI Control Program Change, Control Change, Parameter Change, Bulk Dump


Memories Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25; User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
Inputs Connector: XLR-3-31 type x 2, phone jack x 2; Nominal Level: +4/-10dB switchable; Impedance: 20 kOhms


Outputs Connector: XLR-3-32 type x 2, phone jack x 2; Nominal Level: +4/-10 dB switchable; Impedance: 150 Ohms


Front Panel Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL; Buttons: TYPE, PRESET/USER, -, +, STORE,

AUDITION, EFF LEVEL, UTILITY; LCD: Custom LCD; LED: Two four-segment level meters, UTILITY, EFF LEVEL; Switches: POWER


Rear Panel Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2); Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db)


Power Requirements 120 V, 60 Hz, 15 W


Dimensions (W x D x H) 480 x 227.9 x 45 mm (18.9" x 9" x 1.8")


Weight 3.5 kg (7.7 lb.)

© 2010 RGP Studios, LLC. All Rights Reserved.